Free UK delivery over £50 · 30-day returns on unused items

Home / Guides / Bathroom lighting zones and IP ratings explained

Buying guide

Bathroom lighting zones and IP ratings explained

Water and electricity need care. This guide explains bathroom zones and IP ratings in plain English so you can choose safe lights.

What an IP rating means

IP stands for ingress protection. The first number shows protection against solids like dust and the second against water. A higher second number means better protection. IP44 resists splashes from any direction, while IP65 resists water jets. Bathroom and outdoor lights should always list their IP rating.

Understanding the zones

UK wiring rules divide bathrooms into zones. Zone 0 is inside the bath or shower tray. Zone 1 is the area directly above it up to a set height. Zone 2 extends a short distance around zone 1. Areas outside these zones are treated as being outside the zones. Each zone has minimum requirements for the lights fitted there.

Which lights go where

Lights in zone 1, such as shower downlights, typically need IP65 or higher. Zone 2 usually needs IP44 or more, which covers many bathroom ceiling and wall lights. Mirror lights near the basin often sit in zone 2. Outside the zones, standard fittings can be allowed, but many people still choose IP44 for peace of mind.

Use an electrician

Bathroom electrical work is notifiable in many cases and should be carried out by a qualified electrician. They can measure the zones in your room, check the circuit and make sure fittings are installed correctly. Do not fit mains bathroom lights yourself.

Lighting for a good bathroom

Combine a bright ceiling light with good mirror lighting for shaving and make-up. Lights either side of the mirror give even light on the face. Warm white keeps the room relaxing, and a dimmer or separate switch for softer lights is nice for an evening bath.

Products mentioned